
The THUM can be integrated with several Home Automation
software packages.
Home Control Assistant 7.0
-due out in Feb 2007
Support for the THUM is built into version 7 and above. However
you will need to download the following file and run it.
THUMHCAsetup.zip It
installs a single file on your system which will allow the THUM to
function with HCA.
Note: The software included with the THUM is not required when
using with HCA. The include software should not be running if you
are using the THUM with HCA.
To use with HCA:
 |
Install the following file |
 |
The THUM can be added to a design using manufacturer "Practical Design
Group" and mode "THUM Temperature Humidity Monitor". |
 |
A right click on the device name or icon shows a "Get Temperature" menu
choice. That displays a popup message box showing the temperature and
humidity. |
 |
The Visual Programmer Thermostat Test element supports the THUM for
temperature and humidity tests. |
 |
The Compute Visual Programmer element supports the THUM with the
_temperature and _humidity functions |
HomeSeer 1.7 or 2.x
Support for the THUM is HomeSeer is achieved through the use of a
HomeSeer script.
Note: The software included with the THUM has to be installed and
running in order for use with HomeSeer.
Ver 1.7 - Download script and follow these
instructions
Ver 2.x - This version uses the same script as Ver 1.7. However
the interface is different and we have not developed a guide for it yet.
Mac XTension
When the Mac version of the THUM software is released(Feb 2007) it will
support XTension as well as other Mac Home Automation packages via
Applescript.

|